Omron NX102-12 Series User Manual

ID Information Indication
Unit version Hardware revision
Lot number
Serial number
MAC address
LOT No. DDMYY£ xxxx
PORT1
££££££££££££
PORT2 ££££££££££££
Ver.£.££ HW Rev.£
Note The hardware revision is not displayed for the Unit whose hardware revision is blank.

For NX1P2
The ID information on an NX-series NX1P2-£££££££
CPU Unit is shown below.
PORT1 : £££££££££££
£
PORT2 : ££££££££££££
Ver.1.££ HW Rev. £
LOT No. DDMYY£ xxxx
ID information indication
Lot number
Serial number
Unit version
MAC address
Hardware
revision
Note The hardware revision is not displayed for the Unit that the hardware revision is in blank.

For NJ-series
The ID information on an NJ-series NJ501-££££ CPU Unit is shown below
.
Versions
23
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English