Omron NX102-12 Series User Manual


Function
• Creates a directory of the specified name on the remote host (on the SD Memory Card).
•
An error will occur if a file or directory of the same name already exists in the working directory.
rmdir

Format
rmdir directory_name

Function
• Deletes the directory with the specified name from the remote host (from the SD Memory Card).
•
The directory must be empty to be deleted.
• An error will occur if the specified directory does not exist or is not empty.
pwd

Format
pwd

Function
• Displays the work directory on the remote host.
append

Format
append local_file_name [remote_file_name]

Function
• Uses the file data type that is specified by the type command to append the local file to the re-
mote host (on the SD Memory Card).
cd

Format
cd [directory_name]

Function
• Changes the remote host work directory to the specified remote directory.
•
Files on the SD Memory Card are stored in the MEMCARD1 directory under the root directory (/).
• The root directory (/) is the directory that is used when you log onto the built-in EtherNet/IP port.
The MEMCARD1 directory does not exist if an SD Memory Card is not inserted in the CPU Unit
or if the SD Memory Card power indicator on the CPU Unit is not lit.
11 FTP Server
11-14
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English