EasyManua.ls Logo

Omron NX102-12 Series - Page 447

Omron NX102-12 Series
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Subtree name Standard [(identifier) attribute] Support
Implementation spec-
ifications
ipRouteProto [(9) RO]
This is the routing mechanism used to deter-
mine routes. Some values correspond to
gateway routing protocols, but be aware that
the host may not support those protocols.
other (1): Other than the following items.
local (2): A route set on the local machine.
netmgmt (3): A route set by network manage-
ment.
icmp (4): A route set by an ICMP redirect or
some other ICMP function.
egp (5): EGP
The following are gateway protocols:
ggp (6): GGP
hello (7): HELLO
rip (8): RIP
is-is (9)
es-is (10)
ciscolgrp (1
1)
bbnSpflgp (12)
ospf (13): OSPF
bgp (14)
Support-
ed
According to the stand-
ard.
ipRouteAge [(10) RW]
The elapsed time since this route was updat-
ed (in seconds).
Support-
ed
Always 0.
ipRouteMask [(11) RW]
The subnet mask value in relation to ipRou-
teDest.
On systems that do not support a custom
subnet mask value, this value is based on the
address class of the ipRouteDest field.
If ipRouteDest is 0.0.0.0, this value is also
0.0.0.0.
Support-
ed
According to the stand-
ard.
ipRouteMetric5 [(12) RW]
The alternative routing metric.
Support-
ed
According to the stand-
ard.
ipRouteInfo [(13) RO]
The MIB object ID for the routing protocol
used by this route. If not defined, set to {0.0}.
Support-
ed
0.0
ipNetToMediaTable [(22) NA]
The IP address conversion table used to map
IP addresses to physical addresses.
--- ---
14 SNMP Agent
14-13
NJ/NX-series CPU Unit Built-in EtherNet/IP Port Users Manual (W506)
14-1 SNMP Agent
14
14-1-4 MIB Specifications

Table of Contents

Related product manuals