229
Maintenance Information Window Section 7-3
7-3 Maintenance Information Window
This section describes the Maintenance Information Window, which can be
used to monitor the status of Counter Units and Positioning Units. The Moni-
tor Device Window can be used to check the same Unit status information,
but the examples in this section use the Maintenance Information Window.
7-3-1 Checking Maintenance Information
There are two ways to check maintenance information. One way is to right-
click in the Main Window of the Setting Tool and select Maintenance Infor-
mation. The other way is to double-click the Unit in the Maintenance Mode
Window, click the I/O Module Tab, select the desired Unit, and click the View
Button to display the Maintenance Information Window of the Counter Unit or
Positioning Unit.
13 Reserved ---
14 Reserved ---
15 Reserved ---
Bit Content Description
To Next Page
Loading...
