274
GRT1-TBR Right Turnback Unit Section 8-1
8-1 GRT1-TBR Right Turnback Unit
When a Slice I/O Terminal is divided into blocks to expand the system, mount
a GRT1-TBR Right Turnback Unit to the right side of the first block, start a
new block with a GRT1-TBL Left Turnback Unit, and connect the two Turn-
back Units with a GCN2-100 Turnback Cable.
Component Names
and Functions
Dimensions
8-2 GRT1-TBL Left Turnback Unit
When a Slice I/O Terminal is divided into blocks to expand the system, mount
a GRT1-TBR Right Turnback Unit to the right side of the first block, start a
new block with a GRT1-TBL Left Turnback Unit, and connect the two Turn-
back Units with a GCN2-100 Turnback Cable.
Note When dividing the power supply, always wire the power from the same power
supply that supplies the Communications Unit.
TBR
Turnback Cable connector
12
12.5
83.5
3
3
25.2
19.5
55.72.2
12
OMRON
To Next Page
Loading...
