164
Maintenance Information Window Section 6-3
6-3 Maintenance Information Window
This section describes the Maintenance Information Window, which can be
used to monitor the status of a Temperature Input Unit.
6-3-1 Checking Maintenance Information
There are two ways to check maintenance information. One way is to
right-click in the Main Window of the Setting Tool and select Maintenance
Information. The other way is to double-click the Unit in the Maintenance
Mode Window, click the I/O Module Tab, select the desired Unit, and click the
View Button to display the Maintenance Information Window of the I/O Unit.
8 Off-wire Detection Flag Turns ON when a sensor is discon-
nected or a cold junction compensator
error occurs.
OFF: Normal or the input error detec-
tion disabled setting is set to disable
detecting input errors.
ON: Disconnection or cold junction
compensator error
9 Cold junction compensator
error (GRT1-TS2T only)
OFF: Normal; ON: Error
10 Reserved. ---
11 Reserved. ---
12 Reserved. ---
13 Reserved. ---
14 Reserved. ---
15 Reserved. ---
Bit Contents Description
To Next Page
Loading...
