165
Maintenance Information Window Section 6-3
General Tab Page
Display Area
Status Check Boxes
Tag Page for Individual Input
Item Description
Comment Displays up to 32 characters of text set as the Unit comment.
Last Maintenance
Date
Displays the last maintenance date that was set.
Unit Conduction
Time
Displays the total time that the Unit has been ON (cumulated
power ON time).
Update Button Click this button to update the maintenance information.
Save Maintenance
Counter Button
This button saves the maintenance counter values in the Unit.
If this button is used, the saved values will be retained when
the power supply is turned OFF and ON again.
Item Description
Unit Maintenance Turns ON when the total Unit ON time exceeds the set value.
Also turns ON when the Unit ON time exceeds 87672 hours
(10 years).
Cumulated Value Turns ON when the cumulative counter value exceeds the set
value for any one input.
EEPROM Data Error Turns ON when the data contained in EEPROM is invalid.
Cold junction com-
pensator error
(GRT1-TS2T only)
Turns ON when there is an error in the cold junction compen-
sator.
To Next Page
Loading...
