271
GRT1-CP1-L Positioning Unit Section 7-5
Case 2: UL0 < LL0
■ Setting a Comparison Range
Enter the desired values in the Lower limit and Upper limit Fields. The values
can be between –2,147,483,648 (8000 0000 hex) and 2,147,483,647 (7FFF
FFFF hex).
These settings are stored in non-volatile memory. If a setting is changed, the
new value is effective immediately.
The range will be disabled if the range values are set to the minimum and
maximum values.
■ Default Settings
Press the Default Setting Button on the Range 0 or Range 1 Tab Page to set
the following default values.
LL0
UL0
CNT
OUT0
Setting Default value
Range 0 Disabled. (Option not selected.)
Range 1 Disabled. (Option not selected.)
To Next Page
Loading...
