58
Engrave Submenu
Cut Submenu
Parameters Options Functions/Meanings
X start speed (mm/s) Numerical Sets the speed at which the laser head starts along the X axis.
Y start speed (mm/s) Numerical Sets the speed at which the laser head starts along the Y axis.
X Acc (mm/s²) Numerical Sets the laser head’s acceleration along the X axis.
Y Acc (mm/s²) Numerical Sets the laser head’s acceleration along the Y axis.
Line feed speed (mm/s) Numerical Sets the speed at which the laser head travels between lines.
Engraving factor (0%–200%)* Numerical Sets the overall speed of the laser head
* This parameter was set at the factory to match the Line feed speed and does need adjustment. If you have
changed this by accident, contact the customer service to reinstate it or for customizing them.
To Next Page
Loading...
