24
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
To Non-ARC TV
If the TV does not support the ARC (Audio Return Channel) function (*), connect
an HDMI cable and digital optical cable. If you use a cable set-top box, etc.
connected to the input jack of this unit to watch TV (without using a TV’s built-in
tuner), connection with a digital optical cable is not required.
Setup
• If a digital optical cable is used for connection and "5. HDMI Setup" - "a.
Control" is set to "ON" on the Setup menu ( p59), set "b. ARC" to "OFF".
• If the TV does not have a DIGITAL OPTICAL OUT jack, you can use an analog
audio cable to connect with the AUDIO IN(CD) jack. In this case, refer to
"Menu operations" ( p60) and set "3. Input Assign" - "a. Analog Input" to
"TV" after all connections are completed.
(*) ARC function: Transmits the audio signals of the TV via an HDMI cable, and
plays the audio of the TV on this unit. Connection to an ARC-compatible TV is
complete with one HDMI cable. To check if the TV supports the ARC function,
refer to the instruction manual of the TV, etc.
a b
TV
a HDMI cable, b Digital optical cable
To Next Page
Loading...
