59
Setup
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
Setup Menu
Menu list
You can congure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" ( p60).
1. AccuEQ Room Cal. Set the connection status, volume, etc. of each speaker automatically. p61
2. Manual SP Setup a. Speaker System Change the settings of the speakers connected to ZONE 2, SURROUND BACK, and FRONT
HEIGHT jacks.
p61
b. Speaker Setting Change the settings of connection environment of the speakers. p61
c. X.Over Change the settings of crossover frequencies. p62
d. Channel Level Adjust the volume level of each speaker. p62
e. Speaker Distance Set the distance from each speaker to the listening position. p63
3. Input Assign a. Analog Input Select the input selector from "CD" and "TV" that plays the device connected to the AUDIO IN (CD)
jack.
p64
4. Auto Power Down Auto Power Down Set the automatic standby. p64
5. HDMI Setup a. Control Set the linking function with a CEC-compatible device connected via HDMI. p64
b. ARC Enjoy the sound of an ARC-compatible TV through the speakers connected to the unit. p64
c. Standby Through Play the video and audio of an HDMI-connected player on the TV even if the unit is in standby
mode.
p65
d. 4k60p Setting Make this setting when a TV supporting 4k/60p is connected. p65
6. Power
Management
POWER OUT Standby Make the setting related to power supply from the POWER OUT port on the back side. p65
To Next Page
Loading...
