Onkyo TX-SR383

40
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
BLUETOOTH
®
Playback
You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone.
Basic Operations
Perform the following procedure when this unit is on.
Pairing
1. When you press the BLUETOOTH button, "PAIRING" appears on the display,
and the pairing mode is enabled.
2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled
device, and then select this unit from among the devices displayed. When the
pairing procedure is competed, "CONNECT" will be displayed. If a password is
requested, enter "0000".
• This unit is displayed as "Onkyo TX-SR383".
• To connect another BLUETOOTH-enabled device, disconnect the
connection with the BLUETOOTH-enabled devices being connected and
perform the pairing operation.
• The coverage area is within a radius of 10 m. Note that connection is not
always guaranteed with all BLUETOOTH-enabled devices.
Playing Back
1. Press BLUETOOTH.
2. Perform the connection procedure on the BLUETOOTH-enabled device.
3. Playing the music le.
Turn up the volume of the BLUETOOTH-enabled device to an appropriate
level.
• Due to the characteristics of BLUETOOTH wireless technology, the sound
produced on this unit may slightly be behind the sound played on the
BLUETOOTH-enabled device.
Onkyo TX-SR383