7
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
Display
431
1. Lights in the following conditions.
TUNE: Receiving AM/FM radio.
ST: Receiving FM stereo.
RDS (Australian models): Receiving RDS broadcasting.
2. Lights in the following conditions.
ZONE: When ZONE 2 is on.
SP A: When the speaker system is turned on.
3. Lights when the sleep timer is set. ( p52)
4. Lights in the following conditions.
PRESET: When a registered preset radio station is selected.
MEM: Blinks while presetting radio stations.
kHz/MHz: When receiving AM/FM frequencies.
5. Indicates the preset number of the selected AM/FM station or the type of input
signal.
6. Displays various information of this unit.
7. Lights according to the type of input digital audio signal and the listening
mode.
8. Lights in the following conditions according to the type of audio input signal.
HDMI: HDMI signals are input and the HDMI input is selected. If there is no
HDMI signal input, this indicator blinks.
DIGITAL: Digital signals are input and the digital input is selected. If there is no
Digital signal input, this indicator blinks.
9. Lights when the DIRECT listening mode is selected.
To Next Page
Loading...
