68
Troubleshooting
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/o or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not t well. After reconnecting, turn o and on the
unit and the connected device.
• The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least
2 munites, and then plug it back in.
• Onkyo is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically 69
Resetting the unit
(this resets the unit settings to the default) 69
Troubleshooting 70
Power 70
Audio 70
Listening Modes 72
Video 72
Linked operation 73
Tuner 73
BLUETOOTH function 74
USB storage device 74
Multi-zone function 75
Remote Controller 75
Display 75
Others 75
To Next Page
Loading...
