Onkyo TX-SR383

60
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
Menu operations
Use the OSD (On-Screen Display) that appears on the TV to make the settings.
• When you do not use an HDMI cable but use an analog video cable to connect
with the TV, the operation screens cannot be displayed on the TV. In such a
case, see the display of the main unit to make the settings.
• When the input is set to "USB", or headphones are connected to the PHONE
jack of the main unit, the Setup menu cannot be operated.
Press on the remote controller to display the Setup menu.
Setup
1.AccuEQ Room Cal.
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
6.Power Management
Select the item with the cursors / of the remote controller, and press ENTER
to conrm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press .
• To exit the settings, press .