32
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Preparation
≫
Playback
≫
Setup
≫
"Speaker System" setting (when using ZONE SPEAKER or Front Height Speakers)
When connecting ZONE SPEAKER or front height speakers, settings are
required in the setup menu.
• Make the settings before the "Automatic Speaker Setting (AccuEQ Room
Calibration)" ( p34) procedure.
1. Press BD/DVD button.
2. Press button.
3. Select "2. Manual SP Setup", and press ENTER button.
• Select the item with the cursors of the remote controller, and press ENTER
button to conrm your selection. To return to the previous screen, press
button.
Setup
1.AccuEQ Room Cal.
2.Manual SP Setup
3.Input Assign
4.Auto Power Down
5.HDMI Setup
6.Power Management
To Next Page
Loading...
