124
For example, if line A is being recorded (initiated manually) and you switch to
line B or line A is placed on manual hold and you switch to line B, the recording
is ended and a partial recording saved.
If you disable recording for the call on line B (mode = manual or autostart) and
switch back to line A, the recording for line A is not started again.
The operating modes mentioned (All Calls, AutoStart or Manual) refer to the tele-
phone and are therefore the same for all lines.
Recording calls
Automatic call recording
This is the simplest mode. If you have accepted a call or called a subscriber and
the subscriber answers, the call is recorded automatically. Refer to
page 123
to check which calls this can be.
As soon as the recording starts, you will see the recording symbol
| and hear
a beep (see also
page 123).
You cannot pause the recording manually in this mode.
Manual call recording
Activating or deactivating call recording when the telephone is in idle
mode.
Prerequisite: Manual mode is selected. The recording button is configured and
indicates the status.
Select the option shown in the telephone's context menu to enable the option
or disable the option.
or
Press the recording button to enable the option - the LED key lights up.
Or press the key shown to disable the option - the LED extinguishes.
Recording
_
Recording
¤
To Next Page
Loading...
