OpenScape CP200 - Configuring Call Forwarding

47
z You can also configure this setting via the WEB-Oberfläche  page 132.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Configuring call forwarding
Select and confirm the option shown.
For a description of the settings, see section ”Standard call forwarding”
 Seite 98.
Setting alerts
Use the Call forward alerts menu to enable and disable visual and audible alerts
for call forwarding (not possible with the Forwarding key).
z You can also configure this setting via the WEB-Oberfläche  page 132.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm Yes/No in the context menu.
or
Select and confirm the option shown.
You can also enter the call forwarding settings via the Forwarding key
(
 page 99).
This is how you set local call forwarding on an OpenScape 4000.
User
Configuration
Incoming calls
Forwarding?
Settings?
User
Configuration
Incoming calls
Forwarding?
Alerts
Visual alerts= No f
Yes l
Audible alerts= No f