88
Settings for "pattern"
If you selected "Pattern" as the ringer, you can make further settings for the pat-
tern melody and pattern sequence:
Select and confirm the option shown.
Select the required pattern melody
[
1
]
between 1 and 8 (e. g. 4). You will immedi-
ately hear the corresponding Ringer melody. Confirm the selected Ringer melo-
dy.
Select and confirm the option shown.
Select the required Ringer sequence between 1 and 6 (e.g. 2). You immediately
hear the set Ringer melody with the selected Ringer sequence. Confirm the se-
lected setting.
Select and confirm the option shown.
Activating/deactivating the ringer
You can see whether the function is activated or deactivated from the corre-
sponding icon in the status bar on the display
page 20.
* Hold down the key shown.
Tone and indication with an unsecured voice
connection
Use this option to activate an alerting tone that you hear when a secure voice
connection with the party you are currently talking to ceases to be secure. The
message "Nonsecure connection" also appears.
z You can also configure this setting via the WEB-Oberfläche page 132.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
Secure connection setup is the preference set by your administrator.
To Next Page
Loading...