40
Ending a consultation call
You end the consultation
Select and confirm the option shown.
The consultation call is disconnected. The call with the first party is resumed.
The second party hangs up
If the second party hangs up, you will be prompted to retrieve the first call again
if "Hold and hang-up" is disabled (
page 109). Otherwise, the first call will re-
main on hold until you receive this prompt after a defined time interval.
Confirm the option shown. You are reconnected with the first party.
Ending the consultation with an active headset
Press the "Auto-Headset" function key to activate automatic call answering. This
key and the
Ê key illuminate.
[ You are conducting a consultation call and the second party hangs up. You are
automatically reconnected with the waiting first party. The prompt "Retrieve held
call" does not appear.
Switching to the held party (alternating)
Prerequisite: You are conducting a consultation call page 39 or have accept-
ed a second call
page 43.
Select and confirm the option shown.
In the first display line, the phone number or name and the duration of the active
connection are displayed.
Ending an alternate operation
Select and confirm the option shown.
The active call is disconnected and the held call is restored.
Conference
Prerequisite: You are conducting a consultation call page 39 or have accept-
ed a second call
page 43 and the conference function is active page 117.
If the call is kept on hold, you can retrieve the call via the context menu
before the set time expires.
The administrator has additionally configured a key with the "Auto-Head-
set" function (AICS Zip tone).
Auto-Headset
_
You can switch back and forth between two subscribers by repeatedly se-
lecting and confirming "Alternate".
To Next Page
Loading...
