OpenScape CP200 - Key Click

30
Select and confirm the option shown.
μ or € Set and confirm the volume.
Select and confirm the option shown.
Key click
You can select here whether a tone should be heard when a key is pressed. You
can also decide whether this should apply for all keys or only those on the key-
pad. In addition, you can adjust the tone volume or disable the tone.
z You can also configure this setting via the WEB-Oberfläche  page 132.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Setting the volume for Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume setting. You can choose be-
tween the following three options:
•Low
• High
• Off (no click)
Key selection
Select and confirm the option shown.
Select and confirm if only the keys for entering characters are to be affected.
or
Select and confirm the option shown.
Confirm the option shown.
Handset f
Save & exit l
User
Phone
Key click
Volume
Medium
Keys
Keypad only
All keys
Save & exit