125
Call recording with AutoStart
Standby mode is activated in principle in idle mode. The recording button LED
lights up. You cannot switch off the recorder. As soon as a call is set up, call re-
cording starts automatically.
^ Lift the handset.
or
: Press the key shown.
[ The subscriber answers. You hear a beep, the recording symbol | is shown
on the display and the recording button LED remains lighting. The call is now be-
ing recorded. (see also
page 123)
You can pause the recording at any time and continue it again.
] or : If you end the call, the AutoStart process is set up again for the next call.
Controlling call recording
Starting call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has not started. The recording button LED is not lighting.
[ You are conducting a call (see also page 123).
Press the recording button to start the recording - the LED key lights up.
You hear a beep and the recording symbol
| is shown on the display. The call
is now being recorded. (see also
page 123)
Pausing call recording manually during a call
Prerequisite: Manual mode or AutoStart is selected. You are conducting a call.
Recording has started. The recording button LED lights up.
[ You are conducting a call (see also page 123).
Press the recording button to pause the recording - the LED extinguishes and
the recording symbol
| on the display disappears.
You can start the recording again at any time, for example to continue recording
the current call.
Ending call recording automatically
Prerequisite: You are conducting a call. Recording has started. The recording
button LED lights up.
] or : The recording is ended automatically as soon as the call is terminated or if the
call status changes so that the call is no longer being recorded - for example if
a line is placed on manual hold and another line is seized. (Multi-line).
The LED extinguishes and the recording symbol
| on the display disappears.
Consultation during call recording
Prerequisite: You are conducting a call. Recording has started. The recording
button LED is lighting.
Recording
_
Recording
¤
To Next Page
Loading...
