34
or If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j Enter and confirm the destination phone number. The call is deflected.
Responding to a callback
Prerequisite: A callback was requested. Your phone rings and the subscriber
information appears on the screen.
Accepting a callback
Select and confirm the option shown.
Rejecting a callback
Select and confirm the option shown.
The callback request is deleted. The caller's phone number is added to the
missed calls list.
Forwarding a callback (not OpenScape Voice)
Select and confirm the option shown.
j Enter the phone number and confirm.
You can also use enhanced functions, such as call lists or the personal or cor-
porate directory, in order to call a subscriber
page 48.
Making calls
Off-hook dialing
^ Lift the handset.
j Enter the phone number. If necessary, correct input using the navigation keys
page 16.
Confirm or wait until the dial delay expires (see
page 37).
or
Confirm the option shown
1
. ## represents the last number dialed.
The connection is set up.
The Reject and Deflect functions are authorized by the administrator.
If you allowed the option "Busy When Dialing" page 115, you will not be
interrupted by an incoming call. In this case, the caller hears the busy sig-
nal.
1. Please note the information in relation to the call log page 35.
To Next Page
Loading...
