35
On-hook dialing
The connection is set up with on-hook dialing or via the loudspeaker (speaker-
phone mode).
: Press the key shown.
j Enter the phone number. If necessary, correct input using the navigation keys
page 16.
Z Press or wait until the dial delay expires (see page 37).
or
Confirm the option shown
1
. ## represents the last number dialed.
Entering the phone number first
First enter the phone number. The loudspeaker key illuminates when you enter
the first digit.
j Enter the phone number. If necessary, correct input using the navigation keys
page 16.
Confirm or wait until the dial delay expires (see
page 37).
The connection is set up.
Dialing with the selected dialing key
You can program frequently used phone numbers on programmable keys
(
page 55). If you press a selected dialing key briefly, the associated contact
or phone number appears and dialing is initiated.
Prerequisite: A selected dialing key is programmed
page 55.
Press the programmed selected dialing key. Dialing is initiated.
Redialing via the function key
If you are using a dial plan and Immediate dialling is set up (see
page 116), dialing is automatically performed as soon as the character
string entered matches an entry in the dial plan.
If a connection is temporarily unreachable, you will hear a special informa-
tion tone (short tone sequence). The fault can be rectified quickly, so try
again to dial this phone number after an appropriate time.
1. Please note the information in relation to the call log page 35.
If you are using a dial plan and Immediate dialling is set up (see
page 116), dialing is automatically performed as soon as the character
string entered matches an entry in the dial plan.
Party
_
To Next Page
Loading...
