45
Select and confirm the option shown.
If a destination phone number is stored (
page 111), you can select and con-
firm it. The call is deflected.
or If you did not set a phone number when programming call deflection, you are
now prompted to enter a destination phone number for call deflection.
j Enter and confirm the destination phone number.
The second call is deflected to the destination specified. You are reconnected
with the first party.
Connecting parties
Select and confirm the option shown. The other two parties are now connected
to one another. You can now hang up or dial another number for instance.
or Connecting by hanging up
] or É
Replace the handset or, if you are in speakerphone mode, press the loudspeak-
er key. The other two parties are now connected to one another.
Transferring a call
You can transfer your current call to another party with or without consultation.
Prerequisite: You are conducting a call. The options "Allow call transfer" and
"Transfer on ring" are allowed (
page 113).
Blind transfer
You can choose between easy transfer with the à key or blind transfer via
the menu.
Easy transfer
à Press the key shown.
j Enter and confirm the phone number of the second party to whom you want to
transfer the call. You can also select and call a subscriber here from a call list or
from one of the two phonebooks
page 48.
à Press the key shown again.
Blind transfer
Select and confirm the option shown.
j Enter the phone number of the second party to whom you want to transfer the
call. You can also select and call a subscriber here from a call list or from one of
the two phonebooks
page 48.
Z Confirm or wait until the autodial delay expires.
The display returns to idle following successful transfer.
Connecting by hanging up is activated (consult your administrator) and
"Switch assignment" must be set to "Yes" (
page 113).
To Next Page
Loading...
