54
Programmable keys
The phone features a range of functions that can, if required, be stored on pro-
grammable keys.
The phone comes with four programmable keys, all of which can be pro-
grammed on two separate levels.
You should assign the "Shift" function to one of these keys to be able to switch
between the two key levels.
The keys are preassigned in the as-delivered state (see
page 17).
The keys can also be programmed via the WEB-Oberfläche (
page 132).
List of available functions
1. Unallocated 22.Conference
2. Selected dialling 23.DND
3. Repeat dialling 24.Group pickup
4. CF unconditional 25.Repertory dial
5. CF no reply 26.Line
6. CF busy 27.Feature toggle
1
1 The feature is not available on an OpenScape 4000 telephone system. See also
page 152.
7. CF unconditional - any 28.Mobility
8. CF no reply - any 29.Directed pickup
9. CF busy - any 30.Release
10.CF unconditional - ext. 31.Callback
1
11.CF unconditional - int. 32.Cancel callbacks
1
12.CF no reply - ext. 33.Consultation
13.CF no reply - int. 34.DSS
14.CF busy - ext. 35.Call waiting
15.CF busy - int. 36.Immediate ring
1
16.Ringer off 37.Call recording
1
17.Hold 38.AICS Zip tone
18.Alternate 39.Server feature
19.Blind transfer call 40.BLF
20.Transfer call 41.Send URL
21.Deflect 42.2nd alert
To Next Page
Loading...
