OpenScape CP200 - Listening Modes and Headset Configuration

86
Opening listening mode
Select the mode here that you prefer for open listening (see  page 38).
z You can also configure this setting via the WEB-Oberfläche  page 132.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the setting you want ("standard mode" or "US mode").
Select and confirm the option shown.
Setting headset port use
Select the type of headset port here.
z You can also configure this setting via the WEB-Oberfläche  page 132.
@ Press the key shown.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the setting you want ("Wired headset", "Cordless headset" or
"Conference unit").
Select and confirm the option shown.
User
Audio
Settings?
Open listening = Standard mode f
Save & exit l
User
Audio
Settings?
Headset socket=Wired headset
Save & exit l