OpenScape CP200 - Forwarding Calls for the Primary Line

69
Forwarding calls for the primary line
Call forwarding can only be activated for the primary line. Which call forwards
are possible, how they are configured and activated can be found from
 page 98.
Call forwarding information
If you have activated one of the forwarding types on your phone for the primary
line and a subscriber calls, a popup window with the following information opens:
• Who is calling.
• The forwarding destination.
Dialing using the hot or warm line function
If you lift the phone's handset or press the loudspeaker key, a number is dialed
• immediately in the case of a hot line or
• after a defined period of time in the case of a warm line,
• for the line specified by the administrator.
Examples:
• The phone in the elevator immediately dials the reception number.
• The phone at a patient's bed dials the ward number after one minute, for ex-
ample, if no other number is dialed.
During calls
Making and receiving calls on a single line
If you only use one line on your multi-line telephone to make calls, and you re-
ceive calls on the same line, the phone operates in the same way as a single-
line telephone:
• Number redial
 page 35
• Consultation
 page 39
• Toggle/Connect
 page 40
• Callback
 page 37
•Hold
 page 42
• Call waiting (second call)
 page 43
• Transfer call
 page 45
• Conference
 page 40
Functions available exclusively for the primary line:
• Call lists
 page 24
• Voicemail
 page 23
• Forward calls
 page 98
• Do not disturb
 page 77
ñ
Your administrator has activated "Forwarding shown".
ñ
Your administrator can configure a hot line or warm line for your phone.
Depending on your individual settings, you will be notified of incoming calls
 page 84.