58
Configuring a fixed forwarding key
z You can also program the keys via the WEB-Oberfläche page 132.
Hold down one of the four keys to which a function is to be assigned until the
programming prompt is displayed.
Confirm to begin programming. The key illuminates continuously.
Select and confirm the option shown to program the first level for instance.
Call forwarding depending on the forwarding type
Select a forwarding type:
• Forward all calls
• Forward no reply
•Forward busy
Select and confirm the required function.
Call forwarding depending on the call type
If use of system-assisted functions has been enabled by the administrator and
the Forwarding Int/Ext function activated, call forwarding by call type function-
ality will be available to you. Forwarding in this case is dependent on the for-
warding type and additionally on the call type.
Select a forwarding type:
• CF unconditional - any
• CF unconditional - int.
• CF unconditional - ext.
• CF busy - any
•CF busy - int.
• CF busy - ext.
• CF no reply - any
• CF no reply - int.
• CF no reply - ext.
Select and confirm this option to enter the forwarding destination.
j Enter and confirm the phone number of the forwarding destination.
Select and confirm the option shown. Relabel the key field if appropriate
(
page 138)
ß
_
If the prompt is not displayed or a programmed function is not executed,
you can only launch key programming via the user menu (consult your ad-
ministrator about the current setting).
To Next Page
Loading...
