Optimum S210G - Saw Arch; Forbidden, Warning and Information Labels

Safety
OPTIMUM
MASCHINEN - GERMANY
© 2008
GB
Page 10 Metal belt saw S210G; S275G; S210G Vario; S275G Vario version 1.3.1 4 February 2008
1.7.2 Saw arch
The arch of the metal belt saw is fitted with
a protective cover firmly screwed onto the
rear. The protective cover protects the belt
guide pulleys and the rotating saw blade.
WARNING!
Danger of injury! The teeth of the saw
belt are sharp. Take great care when
removing the rear cover to change the
saw belt.
Illustr.1-2: Saw blade casing
Close and screw down all protective covers before restarting the metal belt saw.
1.7.3 "Forbidden", warning and information labels
INFORMATION
All warning labels must be legible.
Check them regularly.
Positions of labels on the metal belt saw
Illustr.1-3: Metal belt sawS 275 G
Saw arch