Optimum S210G - Saw Belt Guide Bearings; Tension of the Saw Belt

Assembly
OPTIMUM
MASCHINEN - GERMANY
© 2008
GB
Page 22 Metal belt saw S210G; S275G; S210G Vario; S275G Vario version 1.3.1 4 February 2008
3.5.2 Saw belt guide bearings
Check that the saw belt fits snugly inside
the guide bearings.
Illustr.3-6: Guide bearings
3.5.3 Tension of the saw belt
Check the tension of the saw belt. The tension in the saw belt is correct if the middle can be
pushed down 3 mm with a force of approximately 50 N.
Adjustment
 “Tension of the saw belt“ on page 24
Guide bearings