OPTIMUM
MASCHINEN - GERMANY
Safety
© 2008
GB
Page 74 February 2008 version 1.3.1 S210G; S275G; S210G Vario; S275G Vario Metal belt saw
WARNING!
Very serious injury.
It is forbidden to make any modifications or alterations to the operating values of the
metal belt saw! These could endanger personnel and cause damage to the machine.
1.4 Possible dangers caused by the metal belt saw
The metal belt saw has undergone a safety inspection (analysis of danger with assessment of
risks). Design and construction based on this analysis were carried out with the latest technolog-
ical advances.
Nonetheless, there remains a residual risk, since the metal belt saw operates
• with electrical voltage and current,
• with a continuous saw belt.
We have used construction resources and safety techniques to minimise the health risk to per-
sonnel resulting from these hazards.
If the metal belt saw is used by personnel who are not duly qualified, there may be a risk result-
ing from incorrect operation or unsuitable maintenance.
INFORMATION
All personnel involved in assembly, commissioning, operation and maintenance must
• be duly qualified,
• follow this instruction manual.
Improper use
• will endanger personnel,
• will endanger the machine and other objects,
• may affect proper operation of the metal belt saw.
Disconnect the machine whenever cleaning or maintenance work is being carried out.
WARNING!
THE METAL BELT SAW MAY ONLY BE USED WITH THE SAFETY DEVICES ACTIVATED.
Disconnect the metal belt saw whenever you detect a failure in the safety devices or
when they are not fitted!
All additional installations carried out by the operator must incorporate the prescribed
safety devices.
As the machine operator, this will be your responsibility!
“Safety devices“ on page 9
To Next Page
Loading...
