Optimum S210G - Speed of the saw belt

OPTIMUM
MASCHINEN - GERMANY
Design and function
© 2008
GB
Page 254 February 2008 version 1.3.1 S210G; S275G; S210G Vario; S275G Vario Metal belt saw
4.5 Speed of the saw belt
4.5.1 Selector
You can change the speed using the selec-
tor.
Two speeds are available.
Illustr.4-6: Control panel S210G/
S275G
4.5.2 Speed change adjustment of S210G Vario / S275G Vario
The speed change adjustment to VARIO metal belt saws occurs with a potentiometer.
The possible speed range for S210G Vario is 12 - 120 m/min.
The possible speed range for S275G Vario is 14 - 120 m/min.
Illustr.4-7: Potentiometer S210G
Vario/ S275G Vario
ATTENTION!
Wait until the saw blade has come to a complete halt before changing the speed using
the selector.
Changing the speed during operation on metal belt saw S210G and S275G can cause
damage in the metal belt saw.
Never start up the metal belt saw after changing the speed if the belt teeth still are still in
the cutting groove.
Changing the speed during operation on metal belt saw S210G Vario and S275G Vario is
possible.
Selector
Potentiometer