Maintenance
OPTIMUM
MASCHINEN - GERMANY
© 2008
GB
Page 40 Metal belt saw S210G; S275G; S210G Vario; S275G Vario version 1.3.1 4 February 2008
6.3 Repair
For any repair work, get assistance from an employee of Optimum Maschinen Germany
GmbH's technical service or send us the metal belt saw.
If the repairs are carried out by qualified technical staff, they must follow the indications given in
this manual.
Optimum Maschinen Germany GmbH does not take responsibility nor does it guarantee against
damage and operating anomalies resulting from failure to observe this instruction manual.
For repairs, only use
• faultless and suitable tools,
• original spare parts or parts from series expressly authorised by Optimum Maschinen Ger-
many GmbH.
as required
Liquid cooling system
Cooling pump
The cooling pump is almost entirely maintenance
free. Replace the cooling agent regularly, depending
on usage.
Because cooling agents are used that leave residues,
the cooling pump must be washed.
Illustr.6-6: Cooling pump
Intervals /
When?
Where? What? How?
Cooling pump
To Next Page
Loading...
