Optimum S210G - Qualification of personnel

Safety
OPTIMUM
MASCHINEN - GERMANY
© 2008
GB
Page 8 Metal belt saw S210G; S275G; S210G Vario; S275G Vario version 1.3.1 4 February 2008
1.5 Qualification of personnel
1.5.1 Target group
This manual is addressed to
• operators,
• users,
• maintenance stuff.
The warning notes therefore refer to both operation and maintenance of the metal belt saw.
Determine clearly and unequivocally who will be responsible for the different activities on the
machine (use, maintenance and repair).
Vague or unclear assignment of responsibilities constitutes a safety hazard!
Always disconnect the metal belt saw plug from the mains. This will prevent it being used by
unauthorised personnel.
1.5.2 Authorised personnel
WARNING!
Incorrect use and maintenance of the metal belt saw causes danger for personnel,
objects and the environment.
Only authorised personnel may operate the metal belt saw!
Personnel authorised to use and perform maintenance are the trained and instructed technical
staff working for the operator and manufacturer.
The operator must
Obligations
of the
operator
• train staff,
• instruct staff regularly (at least once a year) on
- all safety standards that apply to the machine,
- operation,
- accredited technical guidelines,
• check staff's understanding,
• document training/instruction,
• require staff to confirm participation in training/instruction by a signature,
• check whether the staff are aware of safety and of dangers in the workplace and whether
they observe the instruction manual.
The user must
Obligations
of the
user
• have received training in operation of the metal belt saw,
• know the function and principle of operation,
• before the machine is first used
- have read and understood the instruction manual,
- be familiar with all safety devices and regulations.
additional
qualification
require-
ments
For work on the following machine components there are additional requirements:
• Electrical machine: Only an electrician or person working under the instructions and supervi-
sion of an electrician.