Optimum S210G - EC Declaration of Conformity

OPTIMUM
MASCHINEN - GERMANY
Appendix
© 2008
GB
Page 534 February 2008 version 1.3.1 S210G; S275G; S210G Vario; S275G Vario Metal belt saw
9.6 EC Declaration of Conformity
The manufacturer /
retailer:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
hereby declares that the following product,
Type of machine: Metal belt saw
Name of machine: S 210 G
S 210 G Vario
S 275 G
S275 G Vario
Relevant EU directives:
Machinery Directive 98/37/EC, Annex II A
89/336/EEC
Low voltage directive 73/23/EEC
meets the provisions of the aforementioned directive, including any amendments valid at the time of this state-
ment.
In order to ensure conformity, the following harmonised standards in particular have been applied:
EN 418: 01/1993 Safety of machinery - Emergency stop equipment, functional aspects - Prin-
ciples for design.
EN 60034-1: 09/2000 Rotating electrical machines - Part 1: Ratings and operating characteristics.
EN 60034-9: 06/1998 Rotating electrical machines - Part 9: Noise limits.
EN 60204-1:11/1998 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
EN 50081-2: 03/1994 Electromagnetic Compatibility -Generic Emission Standard - Part 2: Indus-
trial environments.
EN 61000-3-3: 03/1996 Electromagnetic compatibility (EMC) - Part 3-3: Limit values - Limit value
regarding power fluctuations and interruptions in the power supply network
for equipment with an input current up to and including 16 A.
Hallstadt, 13/06/07
Kilian Stürmer
(Managing Director)
Thomas Collrep
(Managing Director)