Optimus DC-600ETH - 11 Operations from the Desk; General Operations; User Levels and Changes; Change of Menu Language

DC-600ETH version 1.4
30
Control central and
paging desk
DC-600ETH
In installations with a Server PC, when the DC-600ETH is restarted, this will download the configurations from the PC, so all the
changes in configuration made from the desk keypad will be lost.
11. OPERATIONS FROM THE DESK
11.1. General operations
11.1.1. User levels and changes
To restrict access to certain functions of the desk,
3 user levels have been established: Basic,
Operator and Administrator.
Basic
Default level when the desk is switched on.
Without password. Allows basic operations
such as making live voice announcements,
sending pre-recorded messages and viewing
the status of the volume.
Operator
With password (by default 1234). In addition
to all the operations available to the basic
user, the zone volume can be modified. To
change the password, refer to section 11.4.2.
Administrator
With password (by default 1234). Without any
restriction. To change the password, refer to
section 11.4.1.
A. Enter as ADMINISTRATOR USER
1. Press OK to access the main menu.
2. Select USER and press OK.
3. Select LOGIN ADMINISTRATOR and press
OK.
4. Enter the administrator user password (1 2 3
4 by default) and press OK.
B. End ADMINISTRATOR session
1. Press OK to access the main menu.
2. Select USER and press OK.
3. Select LOGOUT ADMINISTRATOR and press
OK.
If no key is pressed for 8 minutes, this
operation is performed automatically.
C. Enter as OPERATOR USER
1. Press OK to access the main menu.
2. Select USER and press OK.
3. Select LOGIN OPERATOR and press OK.
4. Enter the operator user password (1 2 3 4 by
default) and press OK.
D. End OPERATOR session
1. Press OK to access the main menu.
2. Select USER and press OK.
3. Select LOGOUT OPERATOR and press OK.
If no key is pressed for 8 minutes, this
operation is performed automatically.
11.1.2. Change of menu language
1. Press OK to access the main menu.
2. Select ADVANCED and press OK.
3. Select OPTIONS and press OK.
4. Select LANGUAGE and press OK.
5. Using the navigation keys / select a
language and press OK.
6. Press the navigation key  until you return to
the start menu.