Optimus DC-600ETH - Updating the MP3 Memory; Formatting the MP3 Memory; Changing the IP Address of the Desk by Means of the Keypad; Re-Establishing the IP Address on the Desk by DIP Switch

DC-600ETH version 1.4
36
Control central and
paging desk
DC-600ETH
Alarm generated by the desk itself
System alarm
11.4.8. Updating the MP3 memory
(Requires Administrator user level).
Whenever files are recorded in or deleted from
the MP3 memory of the desk, it is necessary to
update the memory.
1. Press OK to access the main menu.
2. Select ADVANCED and press OK.
3. Select OPTIONS and press OK.
4. Select MP3 PLAYER and press OK.
5. Select MEMORY UPDATE and press OK.
6. Press the navigation key  to return to the
start screen.
11.4.9. Formatting the MP3 memory
(Requires Administrator user level).
ATTENTION: This action deletes all files
from the MP3 memory of the desk.
1. Press OK to access the main menu.
2. Select ADVANCED and press OK.
3. Select OPTIONS and press OK.
4. Select MP3 PLAYER and press OK.
5. Select FORMAT and press OK.
6. Press the navigation key  to return to the
start screen.
11.4.10. Changing the IP address of the
desk by means of the keypad
(Requires Administrator user level).
1. Press OK to access the main menu.
2. Select ADVANCED and press OK.
3. Select IP ADDRESS (X.X.X.X) and press OK.
4. Use the numeric keypad to enter the IP
address, separating each octet by means of
the  key.
5. Press OK to save the IP address.
6. Press the navigation key  to return to the
start screen.
11.4.11. Re-establishing the IP address
on the desk by DIP switch
(Requires Administrator user level).
1. Disconnect the power supply to the desk.
2. Remove the panel from the underside of the
desk and compose the IP ADDRESS 0.0.0.0 by
means of the DIP switches.
3. Reconnect the power supply to the desk.
4. Once the desk has started up, turn it off
again.
5. Compose the IP address required by means of
the bottom DIP switches. Put the panel back
on and turn the desk on.
12. SYSTEM ALARMS
The desk has several alarm systems which indicate that a fault has occurred in an element of the PA
system.
Information on the LCD screen: On-screen display of icons indicating an alarm and information about
the alarm.
Alarm light indicator: Red LED on the front panel of the desk.
Alarm acoustic indicator: Intermittent beep.
12.1. Alarms on the LCD screen of the desk
The appearance of alarm icons on the screen of the desk
indicates that the desk is receiving one or several alarms
from the system, or the desk itself is generating an alarm.
These icons are visible on any of the desk menus.