Control central and
paging desk
ATTENTION:
If you have configured the desk enabling the option Emergency mode at buttons (see section 7.2.2, no.(8)), when the
WARNING or EVACUATION button is pressed, the desk automatically goes into Emergency Mode, without the need for a
password to be entered, and the message assigned is played.
To exit Emergency Mode, refer to section 11.3.2.
Access to Emergency Mode is PASSWORD protected: 1 2 3 4 (by default).
All the messages, be they live voice or pre-recorded, will be sent to the EMERGENCY GROUP (see sections 7.2.2. (14) and
11.4.7).
The live voice announcement has priority over the Evacuation message, which in turn has priority over the Warning message.
11.3. Basic operations in Emergency Mode
11.3.1. Enter Emergency Mode
1. Press OK to enter the main menu.
2. Press OK once again to enter the
EMERGENCY MODE menu.
3. Press OK once again to enter the LOGIN
menu.
4. Using the numeric keypad, enter the
emergency mode password (1234 by default)
and press OK. The EMERGENCY MODE LED
flashes.
5. Press the navigation key until you return to
the start screen.
11.3.2. Exit Emergency Mode
1. Press OK to enter the main menu.
2. Press OK once again to enter the
EMERGENCY MODE menu.
3. Select LOGOUT and press OK.
4. Press the navigation key to return to the
start screen.
11.3.3. Sending a live voice emergency
announcement
1. Press and hold down GONG+TALK (or
TALK).
2. When the green TALK LED lights up, begin to
speak. When you have finished, release
GONG+TALK (or TALK).
11.3.4. Sending a pre-recorded
warning message in Emergency Mode
1. Press the WARNING key. The message
assigned to the Warning button is
continuously repeated.
2. To stop it, press the WARNING key once
again.
11.3.5. Sending a pre-recorded
evacuation message in Emergency
Mode
1. Press the EVACUATION key. The message
assigned to the Evacuation button is
continuously repeated.
2. To stop it, press the EVACUATION key once
again.
To Next Page
Loading...
