Long-Term Measurement (Lock Mode)
This function allows a continuous measurement without pulling the trigger for that
time. The laser is only working if the trigger is pulled.
Setting range: On/ Off
Default setting: Off
HOLD⇒ II ⇒3x I ⇒Lock symbol flashes ⇒ Λ ⇒ON/ OFF
⇒ V ⇒ON/ OFF
after setting to On:
2x I ⇒HOLD+Lock⇒Trigger⇒starting Measurement mode+Lock
or:
Trigger⇒starting Measurement mode+Lock
You can deactivate the Lock function in the same order, but starting from
Measurement mode+Lock.
The data logger functions are also available in the Lock mode [► Data Logger].
For a long-term temperature measurement of an object it is recommended to
mount the unit on a tripod.
optris LS – E2006-01-A
13
To Next Page
Loading...
