Oracle Database Appliance User Manual

Chapter1 • Overview of System Status Indicators and LEDs 11
1
♦♦♦C H A P T E R  1
Overview of System Status Indicators and LEDs
This manual provides instructions for servicing Oracle Database Appliance hardware. Oracle
Database Appliance comes in four versions:
■
Oracle Database Appliance X5-2
■
Oracle Database Appliance X4-2
■
Oracle Database Appliance X3-2
■
Oracle Database Appliance original version (also referred to as "version 1" or "V1")
The following sections in this chapter describe system status indicators and LEDs:
■
“Oracle Database Appliance X5-2 Status Indicators” on page 11
■
“Oracle Database Appliance X3-2/X4-2 Status Indicators” on page 14
■
“Oracle Database Appliance (Original Version) Status Indicators” on page 17
For information about system features and racking, refer to the Oracle Database Appliance
Owner's Guide. For information on cabling, Oracle ILOM initial setup, and appliance software
setup, refer to the Oracle Database Appliance Getting Started Guide.
Oracle Database Appliance X5-2 Status Indicators
This section describes the status indicators for Oracle Database Appliance X5-2.
■
“Server Node Status Indicators” on page 14
■
“Storage Shelf Status Indicators” on page 15
Server Node Status Indicators
These topics describe Oracle Database Appliance X5-2 server node status indicators (LEDs).

Oracle Database Appliance Specifications

General

Product Type	Database Appliance
Form Factor	Rack-mountable
Storage Type	SSD
RAID Support	RAID 1, RAID 5, RAID 6, RAID 10
Storage Expansion	Yes
Maximum Disk Drives	Varies by model (e.g., 12, 18, 36)