Remove the Server Node Top Cover
Chapter2 • Preparing Oracle Database Appliance for Service 35
1.
Shut down the server node.
See “Shut Down a Server Node” on page 31.
Caution - Data loss. To avoid data loss and file system corruption, always use a graceful
shutdown unless it is an emergency.
2.
To unseat the server node from the system chassis, pull the two latches on the
rear of the server node down [1].
The latches are marked by green tabs. Pull the latches down and away from the rear to the
system.
3.
Slide the server node to the rear and lift it out of the system [2].
Removing the Server Node Top Cover
To gain access to a most of Oracle Database Appliance (original version) server node's internal
components, you must remove the server node's top cover.
Remove the Server Node Top Cover
1.
Remove the server node from the system chassis.
See “Shut Down a Server Node” on page 31.