Chapter6 • Returning Oracle Database Appliance to Operation 137
6
♦♦♦C H A P T E R 6
Returning Oracle Database Appliance to
Operation
This chapter describes how to return Oracle Database Appliance to operation after you have
performed service procedures. It includes:
■
“Returning Oracle Database Appliance X3-2/X4-2/X5-2 to Operation” on page 137
■
“Returning Oracle Database Appliance (Original Version) to Operation” on page 139
Returning Oracle Database Appliance X3-2/X4-2/X5-2 to
Operation
This section describes returning Oracle Database Appliance X3-2, Oracle Database Appliance
X4-2, and Oracle Database Appliance X5-2 to operation after servicing. If you have Oracle
Database Appliance (original version), go to “Returning Oracle Database Appliance (Original
Version) to Operation” on page 139.
Note - The links in the following table take you to instructions outside of the Oracle Database
Appliance library to the Sun Server X3-2, Sun Server X4-2, and Oracle Server X5-2
documentation libraries. Use your browser's Back button to return to the Oracle Database
Appliance library.
ODA X3-2 ODA X4-2 ODA X5-2
Install the Top Cover Install the Top Cover Install the Top Cover
Remove Antistatic Measures Remove Antistatic Measures Remove Antistatic Measures
Reinstall the Server Chassis Into the
Rack
Reinstall the Server Chassis Into the
Rack
Reinstall the Server Chassis Into the
Rack
Return the Server to the Normal
Rack Position
Return the Server to the Normal
Rack Position
Return the Server to the Normal
Rack Position
Reconnect Data Cables and Power
Cords
Reconnect Data Cables and Power
Cords
Reconnect Data Cables and Power
Cords