Oracle Database Appliance - Page 123

Install Fan Power Cables
Chapter5 • Servicing FRUs 123
Power is removed from the server node when you remove it from the system. See
“Removing Server Nodes From the System Chassis” on page 34.
c.
Remove the server node top cover.
See “Removing the Server Node Top Cover” on page 35.
2.
Disconnect the fan power cables and remove them from the server node.
Install Fan Power Cables
1.
Reconnect the fan power cables.
2.
Return the server node to operation.
a.
Install the server node top cover.
See “Installing the Server Node Top Cover” on page 139.
b.
Install the server node into the system.
See “Installing a Server Node Into the System Chassis” on page 140.
c.
Power on the server node.
See “Powering On Oracle Database Appliance (Original Version)” on page 142.