Oracle Database Appliance - Page 168

Access BIOS Setup Utility Menus
168 Oracle Database Appliance Service Manual • February 2016
■
Connect to the server node using the Oracle ILOM Remote Console.
The following procedure describes the steps for accessing the BIOS Setup Utility menus.
Access BIOS Setup Utility Menus
1.
Power-on or power-cycle the server node.
2.
The following information appears on the screen:
3.
To enter the BIOS Setup Utility, do the following:
a.
Wait for the last line of the screen output to change to Initializing USB
Controllers..Done
This will take several seconds.
b.
When Done appears, press the F2 key immediately.
Note - If there is an error during the boot process, you can press F1 to access the BIOS Setup
Utility.