Orolia VersaSync User Manual

2.
Click the PLUS icon in the top right-hand corner of the Configure Reference Pri-
orities table.
3.
The Add Reference window will display:
4.
In the Add Reference window, enter:
Priority Level: Assign a priority to the new reference.
Time: Select the time reference.
PPS: Select the PPS reference.
Enabled: Check this box to enable the new reference.
5.
Click Apply or Submit. (Submit will close the window.)
Deleting a Reference Entry
To delete an entry from the Reference Status table:
1.
Navigate to the Configure Reference Priorities screen via MANAGEMENT >
OTHER: Reference Priority.
2.
In the Configure Reference Priorities table click the Delete button on the right-
hand side of the entry you wish to delete.
3.
In the pop-up window that opens click OK to confirm.
Reordering Reference Entries
To reorder the priority of a reference entry:
1.
Navigate to the Configure Reference Priorities screen via MANAGEMENT >
OTHER: Reference Priority.
2.
Click and hold on the item whose priority you wish to reorder.
3.
Drag the item up or down to the desired place.
156
CHAPTER 3 • VersaSync User Manual Rev. 7.0
3.3 Managing References

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English