It is divided into two panels:
The Actions panel, featuring:
The SNMP Setup button: See "SNMP" on page86.
The Email Setup button: Configure VersaSync's interface settings for
Exchange email servers and Gmail.
For more information on this subject, see the Technical Note Email
Notification Setup.
The Events panel, offering three tabs:
Timing: Events for Sync Status and Holdover, Frequency error, Input
references and the internal oscillator.
GPS: Events related to the GNSS receiver, including antenna cabling,
tracking less than the minimum number of satellites and GNSS receiver
faults.
Systems: Events related to the system operation, including minor and
major alarms being asserted, reboot, timing system errors and option
cards.
2.
In the Events panel, choose the Timing, GPS or System tab. Configure your Noti-
fications (see below), and click Submit.
4.3 Notifications
CHAPTER 4 • VersaSync User Manual Rev. 7.0
211
To Next Page
Loading...
Need help?
General