To add a user account:
1.
Enter a Username. (For rules, see "Rules for Usernames" on page220.)
2.
Enter a Password. The password requirements are configurable, see "Managing
Passwords" on the facing page. By default a password can be any combination of
upper- and lower-case characters. Minimum password length = 8 characters, max-
imum length = 32 characters.
3.
Repeat the new Password.
4.
In the Group field, choose the permission group to which you want the user to
belong to: user or admin. The user permission level assigns permission to access
and change all settings, with the following exceptions that are limited to the admin
accounts:
Changing network settings
Adding and deleting user accounts
Web Interface Settings
Upgrading VersaSync system software
Resetting the VersaSync configuration
Clearing log files
Changing Disciplining Setup options
Changing configuration options for the following protocols or features:
NTP
HTTPS, SSH
LDAP/RADIUS
SNMP (with the exception of configuring SNMP notifications).
222
CHAPTER 4 • VersaSync User Manual Rev. 7.0
4.4 Managing Users and Security
To Next Page
Loading...
Need help?
General