OSEE Lilmon 5 - Chapter 3 Unpack and Installation

Unpack and Installation
7
Chapter 3 Unpack and
Installation
Unpack:
When unpacking the Lilmon 5 monitor, please verify that none of the
components listed in Table 3.1 is damaged or missing. If there are any
components missing, please contact your distributor or osee for it.
Table 3-1 Packing List
No.
Item
Quantity
1
Lilmon 5
1
2
Tilt arm
1
3
Replacement o-type ring for tilt arm
3
4
DC port cover
2
5
Clean cloth
1
6
QSG card
1
7
Service card
1
Installation:
1. Prepare for installation
Please follow the procedures below before installing Lilmon 5:
 Check the package and equipment for any visible damage that
may have occurred during transit.
 Confirm all the items listed on the packing list have been
received.