43
Ⅲ K3 UNIT CHAIR Installation
HANARO CONSOLE INSTALLATION
§ Installation procedures #2
3. Install Main Body
As shown in <Figure 03>, fasten Main Body (A)
and Pole Support (C) to Light Pole ① using bolts.
4. Assemble Main Body Right
As shown in <Figure 04>, align and insert Main
Body Right (D) to the holes on Main Body (A), and
insert and fasten bolts in Pole Support (C).
1
< Figure 04 >
< Figure 03 >
Use a Phillips screwdriver
Use a Phillips screwdriver
『 HANARO CONSOLE Installation』
To Next Page
Loading...